Which applications is the N3-BMS series suitable for?

The right N3-BMS series use case depends on switching voltage, continuous current, inrush current, coil supply, mounting orientation and environmental conditions. For critical projects, verify the model-table datasheet ratings against your actual load profile.

What should I check first when selecting a N3-BMS model?

Start with system voltage and continuous current; then check break capacity, inrush rating, coil voltage, auxiliary contact needs and datasheet temperature limits. The configurator builds the order code according to the manufacturer code structure.

Do datasheet ratings and configurator codes refer to the same product?

Yes. The series table shows technical limits; the configurator turns coil, contact, terminal and option selections within the same model family into an order code. For quotation, send both the generated code and your application note.

Do you provide technical support and cross-reference checks for this series?

Yes. Share your existing part number, operating voltage, load type and environmental conditions, and we can review technically suitable alternatives within the same series or adjacent product families.

What information should I send for a quotation?

The generated part number, quantity, target delivery date, application type, system voltage/current and any datasheet revision are enough. The RFQ cart helps collect these details in one request.

Will this information appear the same after publishing?

Yes. The FAQ and related-insights blocks are part of the application code and appear with the same design on the published site.

B2B · PRODUCT SERIES · LITHIUM BALANCEREF · IMB · LITHIUM BALANCE · N3-BMS

LIVE

Lithium Balance · PRODUCT SERIES

Lithium Balance n3-BMS™ Series — ISO 26262 ASIL C Distributed BMS

Functional-safety certified, distributed BMS scalable up to 1000 V / 2000 A

The n3-BMS is Lithium Balance's flagship product for functional-safety projects. The master handles centralized decision control while slaves run cell measurement and balancing. The architecture scales by adding slaves according to the physical layout. ASIL C certification meets diagnostic coverage and safe-state transition requirements, shortening OEM homologation cycles.

01Topology: Dağıtık (Master + Slave)
02Cell Balancing: Pasif dengeleme
03Safety Certification: ISO 26262 ASIL C
04CAN Channels: 2 × CAN
05Pack Voltage Range: 12 V – 1000 V
06Cell Channels: 6–12 / slave
07Temperature Channels: 2 / slave
08Cells in Series: ≤ 360
09Configuration Software: Creator (ücretsiz)
10Max Pack Current: 2000 A

n3-BMS™ Series — ISO 26262 ASIL C Distributed BMS Series Contactor Models

Sorted by current rating (150A → 1000A)

3 MODELS

MODEL↑ current	Topology	Cell Channels	Pack Voltage Range	CAN Channels	max current
n3-BMS Cell Monitoring Unit (CMU)	Slave modülü	6 – 12 hücre / CMU	—	Daisy-chain	—
n3-BMS Current Sensor	Shunt + Hall	—	—	—	≤ 2000 A
n3-BMS Master Control Unit	Master modülü	—	12 V – 1000 V	2 × CAN (ISO 11898)	—

FREQUENTLY ASKED QUESTIONS

About the N3-BMS series

06/06

RELATED INSIGHTS · N3-BMSREF · IMB · PUB · 04 ENTRIES

LIVE

RELATED INSIGHTS

Go deeper

04 ENTRIES

SOON
N3-BMS Series Selection Guide
A practical approach to selecting the right model family by evaluating voltage, current, coil, mounting and environmental conditions together.
In progress
SOON
N3-BMS Datasheet Checklist
The key technical rows and application limits to verify before quotation or engineering approval.
In progress
SOON
N3-BMS Application Notes
Notes focused on thermal limits, switching duty, protection coordination and mounting conditions for field reliability.
In progress
SOON
N3-BMS RFQ Preparation
How to clarify part number, quantity, application and technical requirements to get accurate pricing and lead time.
In progress

// end of index · 04 / 04

Lithium Balance n3-BMS™ Series — ISO 26262 ASIL C Distributed BMS

About the N3-BMS series

01Which applications is the N3-BMS series suitable for?

02What should I check first when selecting a N3-BMS model?

03Do datasheet ratings and configurator codes refer to the same product?

04Do you provide technical support and cross-reference checks for this series?

05What information should I send for a quotation?

06Will this information appear the same after publishing?

Go deeper

N3-BMS Series Selection Guide

N3-BMS Datasheet Checklist

N3-BMS Application Notes

N3-BMS RFQ Preparation