Which applications is the GILL-POZISYON-SENSORLERI series suitable for?

The right GILL-POZISYON-SENSORLERI series use case depends on switching voltage, continuous current, inrush current, coil supply, mounting orientation and environmental conditions. For critical projects, verify the model-table datasheet ratings against your actual load profile.

What should I check first when selecting a GILL-POZISYON-SENSORLERI model?

Start with system voltage and continuous current; then check break capacity, inrush rating, coil voltage, auxiliary contact needs and datasheet temperature limits. The configurator builds the order code according to the manufacturer code structure.

Do datasheet ratings and configurator codes refer to the same product?

Yes. The series table shows technical limits; the configurator turns coil, contact, terminal and option selections within the same model family into an order code. For quotation, send both the generated code and your application note.

Do you provide technical support and cross-reference checks for this series?

Yes. Share your existing part number, operating voltage, load type and environmental conditions, and we can review technically suitable alternatives within the same series or adjacent product families.

What information should I send for a quotation?

The generated part number, quantity, target delivery date, application type, system voltage/current and any datasheet revision are enough. The RFQ cart helps collect these details in one request.

Will this information appear the same after publishing?

Yes. The FAQ and related-insights blocks are part of the application code and appear with the same design on the published site.

B2B · PRODUCT SERIES · GILL SENSORS & CONTROLSREF · IMB · GILL SENSORS & CONTROLS · GILL POSITION SENSORS

LIVE

Gill Sensors & Controls · PRODUCT SERIES

Gill Position SensorsContactless, No Moving Parts Family

A two-family portfolio of solid-state inductive Blade position sensors for hydraulic stroke and rotation angle measurement — with 4-20 mA, 0-10 V and CANbus output options.

The Gill Position Sensor family uses solid-state inductive Blade technology with no moving parts to measure position values such as hydraulic cylinder stroke, control pedal angle or steering joint rotation, friction-free.

The family covers two sub-series: Blade Linear for linear stroke (0-250 / 500 / 1000 mm; 4-20 mA, CANbus or 0-10 V output) and Blade Rotary for rotation angle (0-360°; 4-20 mA or CANopen / J1939).

All models are stainless steel and rated IP67-IP69K, withstanding vibration and high-pressure washdown on construction equipment, agricultural vehicles, defence platforms and OEM lines. Field calibration is performed via the Gill PC interface.

Hydraulic strokeConstruction equipmentAgricultural vehicleDefence platformSteering / joint angleControl pedalOEM linesMobile robotics

REFERENCE SPECIMENGILL POSITION SENSORS · 01

CONTACTLESSPOSITION SENSORGILL SENSORS & CONTROLS

Models

Technology

Inductive Blade · no moving parts

Output

4-20 mA · 0-10 V · CANbus J1939 / CANopen

Protection

IP67 / IP69K — stainless steel

Family

2 sub-series · Blade Linear / Blade Rotary

Blade Linear — Contactless Linear Stroke

Inductive Blade sensor for hydraulic cylinder stroke · 0-1000 mm · 4-20 mA · CANbus · 0-10 V · IP69K

3 MODELS

SHARED IN THIS GROUPTechnology:Inductive Blade · contactlessRange:0-250 to 0-1000 mmOutput:4-20 mA · CANbus · 0-10 VProtection:IP69KHousing:Stainless steelProtection:IP69K

Model	Range	Output	Datasheet
BladeLinear-250-4-20	0-250 mm	4-20 mA	Datasheet not uploaded yet — BladeLinear-250-4-20
BladeLinear-500-CAN	0-500 mm	CANbus	Datasheet not uploaded yet — BladeLinear-500-CAN
BladeLinear-1000-0-10V	0-1000 mm	0-10 V	Datasheet not uploaded yet — BladeLinear-1000-0-10V

Blade Rotary — Contactless Angle

Contactless Blade sensor for rotation angle · 0-360° full turn · 4-20 mA · CANopen / J1939 · IP67/IP69K

2 MODELS

SHARED IN THIS GROUPTechnology:Inductive Blade · contactlessRange:0-360° full turnOutput:4-20 mA · CANopen / J1939Protection:IP67 / IP69KHousing:Stainless steelRange:0-360°

Model	Output	Protection	Datasheet
BladeRotary-360-4-20	4-20 mA	IP67	Datasheet not uploaded yet — BladeRotary-360-4-20
BladeRotary-360-CAN	CANopen / J1939	IP69K	Datasheet not uploaded yet — BladeRotary-360-CAN

FREQUENTLY ASKED QUESTIONS

About the Gill Position Sensors series

06/06

RELATED INSIGHTS · GILL POSITION SENSORSREF · IMB · PUB · 04 ENTRIES

LIVE

RELATED INSIGHTS

Go deeper

04 ENTRIES

SOON
GILL-POZISYON-SENSORLERI Series Selection Guide
A practical approach to selecting the right model family by evaluating voltage, current, coil, mounting and environmental conditions together.
In progress
SOON
GILL-POZISYON-SENSORLERI Datasheet Checklist
The key technical rows and application limits to verify before quotation or engineering approval.
In progress
SOON
GILL-POZISYON-SENSORLERI Application Notes
Notes focused on thermal limits, switching duty, protection coordination and mounting conditions for field reliability.
In progress
SOON
GILL-POZISYON-SENSORLERI RFQ Preparation
How to clarify part number, quantity, application and technical requirements to get accurate pricing and lead time.
In progress

// end of index · 04 / 04

Gill Position SensorsContactless, No Moving Parts Family

About the Gill Position Sensors series

01Which applications is the GILL-POZISYON-SENSORLERI series suitable for?

02What should I check first when selecting a GILL-POZISYON-SENSORLERI model?

03Do datasheet ratings and configurator codes refer to the same product?

04Do you provide technical support and cross-reference checks for this series?

05What information should I send for a quotation?

06Will this information appear the same after publishing?

Go deeper

GILL-POZISYON-SENSORLERI Series Selection Guide

GILL-POZISYON-SENSORLERI Datasheet Checklist

GILL-POZISYON-SENSORLERI Application Notes

GILL-POZISYON-SENSORLERI RFQ Preparation