Which applications is the GE200-INDUKTIF series suitable for?

The right GE200-INDUKTIF series use case depends on switching voltage, continuous current, inrush current, coil supply, mounting orientation and environmental conditions. For critical projects, verify the model-table datasheet ratings against your actual load profile.

What should I check first when selecting a GE200-INDUKTIF model?

Start with system voltage and continuous current; then check break capacity, inrush rating, coil voltage, auxiliary contact needs and datasheet temperature limits. The configurator builds the order code according to the manufacturer code structure.

Do datasheet ratings and configurator codes refer to the same product?

Yes. The series table shows technical limits; the configurator turns coil, contact, terminal and option selections within the same model family into an order code. For quotation, send both the generated code and your application note.

Do you provide technical support and cross-reference checks for this series?

Yes. Share your existing part number, operating voltage, load type and environmental conditions, and we can review technically suitable alternatives within the same series or adjacent product families.

What information should I send for a quotation?

The generated part number, quantity, target delivery date, application type, system voltage/current and any datasheet revision are enough. The RFQ cart helps collect these details in one request.

Will this information appear the same after publishing?

Yes. The FAQ and related-insights blocks are part of the application code and appear with the same design on the published site.

B2B · PRODUCT SERIES · MONARCH INSTRUMENTREF · IMB · MONARCH INSTRUMENT · GE200-INDUKTIF

LIVE

Monarch Instrument · PRODUCT SERIES

Monarch GE200 HP Inductive Sensor

Electromagnetic inductive trigger sensor for spark plugs and gas engines

The GE200 HP is a 15 ft cable electromagnetic inductive spark sensor that wraps around an internal-combustion (especially gas engine) spark plug wire to non-contact detect ignition pulses. The Monarch MAG-AMP amplifier module powers the sensor and converts the signal into a 3.3–24 Vdc TTL pulse output compatible with all Monarch panel tachometers, frequency converters, portable tachometers and stroboscopes. Preferred for engine applications where reflective tape on a rotating shaft is impractical and direct ignition RPM measurement is required.

01Cable: 15 ft (4,57 m)
02Power: Monarch MAG-AMP modülü gerektirir
03origin: ABD
04Output: 3,3–24 Vdc TTL puls (amplifikatör ile)
05Housing / IP: Endüstriyel sensör gövdesi
06Sensor Type: Elektromanyetik endüktif (buji sarımlı)
07speed range: Motor ateşleme RPM'si
08installation: Buji kablosuna sarım

Monarch GE200 HP Inductive Sensor — Model Comparison

3 models · entry-level to full-featured

3 MODELS

MODEL↑ current	Cable	Power	Sensor Type	Output	PDF
GE200-AMP-P	15 ft sensör + amplifikatör + 1/8" jak	9 Vdc batarya	Endüktif sensör + MAG-AMP	3,3–24 Vdc TTL puls	Datasheet (PDF) — GE200-AMP-P
GE200-AMP-W	15 ft sensör + amplifikatör + kalaylı uç	9 Vdc batarya	Endüktif sensör + MAG-AMP	3,3–24 Vdc TTL puls	Datasheet (PDF) — GE200-AMP-W
GE200-HP	15 ft	MAG-AMP modülü ile	Endüktif spark sensörü	Amplifikatör gerekli	Datasheet (PDF) — GE200-HP

FREQUENTLY ASKED QUESTIONS

About the GE200-INDUKTIF series

06/06

RELATED INSIGHTS · GE200-INDUKTIFREF · IMB · PUB · 04 ENTRIES

LIVE

RELATED INSIGHTS

Go deeper

04 ENTRIES

SOON
GE200-INDUKTIF Series Selection Guide
A practical approach to selecting the right model family by evaluating voltage, current, coil, mounting and environmental conditions together.
In progress
SOON
GE200-INDUKTIF Datasheet Checklist
The key technical rows and application limits to verify before quotation or engineering approval.
In progress
SOON
GE200-INDUKTIF Application Notes
Notes focused on thermal limits, switching duty, protection coordination and mounting conditions for field reliability.
In progress
SOON
GE200-INDUKTIF RFQ Preparation
How to clarify part number, quantity, application and technical requirements to get accurate pricing and lead time.
In progress

// end of index · 04 / 04

Monarch GE200 HP Inductive Sensor

About the GE200-INDUKTIF series

01Which applications is the GE200-INDUKTIF series suitable for?

02What should I check first when selecting a GE200-INDUKTIF model?

03Do datasheet ratings and configurator codes refer to the same product?

04Do you provide technical support and cross-reference checks for this series?

05What information should I send for a quotation?

06Will this information appear the same after publishing?

Go deeper

GE200-INDUKTIF Series Selection Guide

GE200-INDUKTIF Datasheet Checklist

GE200-INDUKTIF Application Notes

GE200-INDUKTIF RFQ Preparation