Which applications is the MANYETIK-SENSORLER series suitable for?

The right MANYETIK-SENSORLER series use case depends on switching voltage, continuous current, inrush current, coil supply, mounting orientation and environmental conditions. For critical projects, verify the model-table datasheet ratings against your actual load profile.

What should I check first when selecting a MANYETIK-SENSORLER model?

Start with system voltage and continuous current; then check break capacity, inrush rating, coil voltage, auxiliary contact needs and datasheet temperature limits. The configurator builds the order code according to the manufacturer code structure.

Do datasheet ratings and configurator codes refer to the same product?

Yes. The series table shows technical limits; the configurator turns coil, contact, terminal and option selections within the same model family into an order code. For quotation, send both the generated code and your application note.

Do you provide technical support and cross-reference checks for this series?

Yes. Share your existing part number, operating voltage, load type and environmental conditions, and we can review technically suitable alternatives within the same series or adjacent product families.

What information should I send for a quotation?

The generated part number, quantity, target delivery date, application type, system voltage/current and any datasheet revision are enough. The RFQ cart helps collect these details in one request.

Will this information appear the same after publishing?

Yes. The FAQ and related-insights blocks are part of the application code and appear with the same design on the published site.

B2B · PRODUCT SERIES · MONARCH INSTRUMENTREF · IMB · MONARCH INSTRUMENT · MANYETIK-SENSORLER

LIVE

Monarch Instrument · PRODUCT SERIES

Monarch M-190 / MT-190 Magnetic Sensors

Self-powered magnetic gear sensors for 60-tooth targets

The Monarch M-190W magnetic sensor is self-powered, requires no external power, and is commonly used with 60-tooth 20-pitch gears. MT-190W (tinned-lead) and MT-190P (1/8" phone plug) models work with the MT-190 magnetic trigger amplifier module to enhance performance and extend the operating gap to 0.25 in (6.35 mm) from the target. The 3.3–24 Vdc TTL pulse output is compatible with all Monarch panel tachometers, frequency converters, portable tachometers and stroboscopes. The magnetic sensing principle is ideal for applications where reflective tape cannot be applied, or in dirty/oily environments that still require RPM measurement.

01Cable: 8 ft kablolu — W (kalaylı uç) veya P (1/8" jak)
02Power: Kendinden beslemeli (harici güç yok)
03origin: ABD
04Output: 3,3–24 Vdc TTL puls
05Housing / IP: Paslanmaz çelik / dişli
06Sensor Type: Manyetik (60-diş 20-pitch dişli hedef)
07speed range: 1 – 99.999 RPM
08operating gap: M-190: 0,13 mm · MT-190: 0,25 mm (6,35 mm)

Monarch M-190 / MT-190 Magnetic Sensors — Model Comparison

4 models · entry-level to full-featured

4 MODELS

MODEL↑ current	Cable	Power	Housing / IP	Sensor Type	Output	PDF
M-190W	8 ft, kalaylı uç	Kendinden beslemeli	Paslanmaz çelik / dişli	Manyetik (60-diş 20-pitch dişli)	Kendinden tetikli (amplifikatör ile birlikte kullanılır)	Datasheet (PDF) — M-190W
MT-190	M-190W manyetik sensör ile birlikte kullanılır	9 Vdc batarya	Plastik modül	Manyetik tetik amplifikatör modülü	3,3–24 Vdc TTL puls	Datasheet (PDF) — MT-190
MT-190P	8 ft, 1/8" jak (P-plug)	Kendinden beslemeli (amplifikatörlü)	Paslanmaz çelik / dişli	Manyetik + dahili amplifikatör	3,3–24 Vdc TTL puls	Datasheet (PDF) — MT-190P
MT-190W	8 ft, kalaylı uç	Kendinden beslemeli (amplifikatörlü)	Paslanmaz çelik / dişli	Manyetik + dahili amplifikatör	3,3–24 Vdc TTL puls	Datasheet (PDF) — MT-190W

FREQUENTLY ASKED QUESTIONS

About the MANYETIK-SENSORLER series

06/06

RELATED INSIGHTS · MANYETIK-SENSORLERREF · IMB · PUB · 04 ENTRIES

LIVE

RELATED INSIGHTS

Go deeper

04 ENTRIES

SOON
MANYETIK-SENSORLER Series Selection Guide
A practical approach to selecting the right model family by evaluating voltage, current, coil, mounting and environmental conditions together.
In progress
SOON
MANYETIK-SENSORLER Datasheet Checklist
The key technical rows and application limits to verify before quotation or engineering approval.
In progress
SOON
MANYETIK-SENSORLER Application Notes
Notes focused on thermal limits, switching duty, protection coordination and mounting conditions for field reliability.
In progress
SOON
MANYETIK-SENSORLER RFQ Preparation
How to clarify part number, quantity, application and technical requirements to get accurate pricing and lead time.
In progress

// end of index · 04 / 04

Monarch M-190 / MT-190 Magnetic Sensors

About the MANYETIK-SENSORLER series

01Which applications is the MANYETIK-SENSORLER series suitable for?

02What should I check first when selecting a MANYETIK-SENSORLER model?

03Do datasheet ratings and configurator codes refer to the same product?

04Do you provide technical support and cross-reference checks for this series?

05What information should I send for a quotation?

06Will this information appear the same after publishing?

Go deeper

MANYETIK-SENSORLER Series Selection Guide

MANYETIK-SENSORLER Datasheet Checklist

MANYETIK-SENSORLER Application Notes

MANYETIK-SENSORLER RFQ Preparation