Skip to main content
Industrial supply network
IMB Electric
ASM posiwire® accessories — cover photo of the manufacturer's own official accessories datasheet (DB-posiwire-zub-E-2020); the visible parts share the geometry of the SR2 cable pulley and SAB5 dust wiper drawings in the same datasheet. Family-level; not assigned one-to-one to GK1/GK2, SV1, MAG1 or the M8/M12 cable SKUs
B2B · PRODUCT SERIES · ASM GMBH
LIVE

ASM GmbH · PRODUCT SERIES

ASM GmbH ASM Accessories, Cables, and Spare Parts

Original accessories, cables, connectors, position magnets, spare parts, and PRODIS digital displays for ASM sensors. 146+ products — covers all POSIWIRE, POSITAPE, POSICHRON, POSIMAG, POSITILT, POSIROT series. Stock delivery from Türkiye + regional fast supply.

The ASM sensor portfolio contains 80+ models, and each series requires its own + shared accessories/parts. This page lists 146+ products compiled from the 2015 ASM Distributor Price List — organised in 9 category-based tables.

Universal Accessories (common to all ASM series):
• PRODIS digital process displays (PD-ADC, PD-INC) — display analog or incremental sensor output on a panel meter
• M12 standard cables (4-wire / 8-wire × axial/radial × 2/5/10/15/20 m) — including IP69K versions
• CAN-Bus cables (M12 5-pin) — for CANopen and SAE J1939 sensors
• T-connector + termination resistor — for CAN bus topology

Series-Specific Accessories:
• POSIWIRE: Potentiometer + encoder + signal conditioner spares, draw wire kits (stainless or PA), spring kits (model-based), mechanical mounting brackets, cable guides (SR1/SR2/SR2-VA), cable brush (SAB5), magnetic clamps, floats, LR19 adapters
• POSITAPE: WBR1 deflection pulley, MAG1/2, SCHWIMMER float
• POSICHRON: 13 different position magnets (unguided, guided, ring magnet floats), 7 mounting brackets, PCGS push-rod (75-2000 mm) and PCGK link
• POSIROT (PRAS): 11 position magnets (PRMAG1/2/5/20/21/22 + Tmax 125°C high-temp versions), PRAS26 special mating connector
• POSIMAG (magnetic scale): PMAB protection tape, PMFP/PMHP profiles (flat/high), PMGW3 glider, mounting kits
• POSIROT/POSITILT: PRPT-BPL mounting plates (screw/weld/PRAS3), PRPT-BFS excenter + clamp

Service and Spare Parts Policy:
ASM sensors have an average 5-10 year service life. Typical spare-part needs:
• Pot/encoder replacement in POSIWIRE (after years) — Signal conditioner replacement after calibration
• POSIWIRE draw wire (stainless/PA) and spring (model-based) — after wear
• In case of position-magnet loss or damage — for POSICHRON and POSIROT
• Cable damage or extension — universal M12 cables
• Connector replacement — migration from old D8/DIN to M12

IMB Electric is listed for Türkiye on ASM Sensor's official global distribution network, with our authorisation extending to Türkiye + the Middle East + North Africa + Western Asia. For all the items above, we provide stock delivery from İstanbul İkitelli OSB + fast shipping in the region + technical support.

Service maintenance spare partsSensor cable extensionConnector replacement (D8 → M12)Position magnet lossCAN-Bus topology setupPRODIS panel displayPOSIWIRE draw wire / spring replacementPOSIMAG scale extensionPOSITAPE tape deflectionRegional fast supply
FAMILY IMAGEASM ACCESSORIES, CABLES, AND SPARE PARTS · 01
ASM posiwire® accessories — cover photo of the manufacturer's own official accessories datasheet (DB-posiwire-zub-E-2020); the visible parts share the geometry of the SR2 cable pulley and SAB5 dust wiper drawings in the same datasheet. Family-level; not assigned one-to-one to GK1/GK2, SV1, MAG1 or the M8/M12 cable SKUs
INDUSTRIALPOSITION SENSORASM GMBH
ASM posiwire® accessories — cover photo of the manufacturer's own official accessories datasheet (DB-posiwire-zub-E-2020); the visible parts share the geometry of the SR2 cable pulley and SAB5 dust wiper drawings in the same datasheet. Family-level; not assigned one-to-one to GK1/GK2, SV1, MAG1 or the M8/M12 cable SKUs
Models
110
01

PRODIS Digital Process Displays (Panel Meter)

6 models · 4-20 mA output

6 MODELS
ModelProduct NameApplicationCompatible SeriesDatasheet
PD-ADC-24VDCPRODIS — Analog Sensor Display (24VDC)Displays position/angle/inclination values from 0-10V / 0.5-4.5V / 4-20mA analog sensors on panel. 24VDC supply.POSIWIRE · POSITAPE · POSICHRON · POSITILT · POSIROT (analog versiyon)Datasheet not uploaded yet — PD-ADC-24VDC
PD-ADC-230VACPRODIS — Analog Sensor Display (230VAC)Same as PD-ADC-24VDC but 230VAC mains supply — when 24VDC isn't available in the control cabinet.POSIWIRE · POSITAPE · POSICHRON · POSITILT · POSIROT (analog versiyon)Datasheet not uploaded yet — PD-ADC-230VAC
PD-INC-24VDC-...PRODIS — Incremental Sensor Display (24VDC)Counts and displays position from incremental (TTL/RS422/HTL) output sensors. For POSIMAG (magnetic scale) and POSIROT incremental encoders.POSIMAG (PMIS3) · POSIROT incremental enkoderlar · POSIMAG rot (PMIR)Datasheet not uploaded yet — PD-INC-24VDC-...
-230VACPRODIS Option: 230VAC Power SupplyTo add 230VAC supply to PD-INC-24VDC later (PD-ADC-230VAC already includes).PD-INC-24VDCDatasheet not uploaded yet — -230VAC
-REL2PRODIS Option: 2 Relay Outputs2 relay outputs — for position limit exceedance, switching alarm function (cannot be combined with SSI I/F or -DT).PD-ADC ve PD-INCDatasheet not uploaded yet — -REL2
-DTPRODIS Option: Desktop HousingDesktop test-device case instead of panel meter — for calibration labs or field test (only with 230VAC version).PD-ADC-230VAC + PD-INC + -230VAC kombosuDatasheet not uploaded yet — -DT
02

Universal M12 Cables (4-wire and 8-wire)

5 models · 4-20 mA output

5 MODELS
ModelDescriptionLength OptionsCompatible SeriesDatasheet
KAB-{2/5/10/15/20}M-M12/4F/W-LITZE4-wire M12 cable, open ends, RADIAL (W)2M / 5M / 10M / 15M / 20MPOSITAPE · POSITILT · POSIROT · POSIMAG rot · POSIHALL · POSIROT AWS — 4-pin M12 konnektörlü modellerDatasheet not uploaded yet — KAB-{2/5/10/15/20}M-M12/4F/W-LITZE
KAB-{2/5/10/15/20}M-M12/4F/G-LITZE4-wire M12 cable, open ends, AXIAL (G)2M / 5M / 10M / 15M / 20MPOSITAPE · POSITILT · POSIROT · POSIMAG rot · POSIHALL · POSIROT AWS — 4-pin M12 konnektörlü modellerDatasheet not uploaded yet — KAB-{2/5/10/15/20}M-M12/4F/G-LITZE
KAB-{2/5/10/15/20}M-M12/8F/W-LITZE8-wire M12 cable, open ends, RADIAL (W)2M / 5M / 10M / 15M / 20MPOSIWIRE · POSITAPE · POSITILT · POSIROT (incremental encoder modeller) — 8-pin M12Datasheet not uploaded yet — KAB-{2/5/10/15/20}M-M12/8F/W-LITZE
KAB-{2/5/10/15/20}M-M12/8F/G-LITZE8-wire M12 cable, open ends, AXIAL (G)2M / 5M / 10M / 15M / 20MPOSIWIRE · POSITAPE · POSITILT · POSIROT (incremental encoder modeller) — 8-pin M12Datasheet not uploaded yet — KAB-{2/5/10/15/20}M-M12/8F/G-LITZE
KAB-…/…/IP69K-LITZEIP69K Surcharge (high-pressure washdown resistance)Tüm yukarıdaki kablolar için ek seçenekGıda/ilaç/kimya tesisleri (wash-down standardı gerekli) — tüm M12 kablolarda opsiyonelDatasheet not uploaded yet — KAB-…/…/IP69K-LITZE
03

CAN-Bus Cables and Accessories

6 models · 4-20 mA output

6 MODELS
ModelDescriptionApplicationDatasheet
KAB-0,3M-M12/5F/G-M12/5M/G-CANCAN-Bus cable, 0.3m (M12 5-pin × M12 5-pin)Yan yana 2 CAN sensörünü birleştirmek için — örn. tracker üzerinde 2 PTK sensörü.Datasheet not uploaded yet — KAB-0,3M-M12/5F/G-M12/5M/G-CAN
KAB-2M-M12/5F/G-M12/5M/G-CANCAN-Bus cable, 2mStandart kabin içi mesafe için.Datasheet not uploaded yet — KAB-2M-M12/5F/G-M12/5M/G-CAN
KAB-5M-M12/5F/G-M12/5M/G-CANCAN-Bus cable, 5mOrta mesafe — makine içi farklı kabinler arası.Datasheet not uploaded yet — KAB-5M-M12/5F/G-M12/5M/G-CAN
KAB-10M-M12/5F/G-M12/5M/G-CANCAN-Bus cable, 10mUzun mesafe — büyük tesiste sensör-PLC arası.Datasheet not uploaded yet — KAB-10M-M12/5F/G-M12/5M/G-CAN
KAB-TCONN-M12/5M-2M12/5F-CANT-connector (for bus branch)CAN bus mimarisinde sensörü ana hat üzerinde paralel bağlamak için T-konnektör. Her ek sensör için 1 adet gerekir.Datasheet not uploaded yet — KAB-TCONN-M12/5M-2M12/5F-CAN
KAB-RTERM-M12/5M/G-CANTermination resistor (120 Ω, for bus end)CAN bus topoloji kurallarına göre bus'un her iki ucu 120 Ω terminator ile sonlandırılmalı. Aksi halde signal reflection ve veri hatası olur.Datasheet not uploaded yet — KAB-RTERM-M12/5M/G-CAN
04

DIN and M8 Cables (Legacy Connector Types)

6 models · 4-20 mA output

6 MODELS
ModelDescriptionLengthCompatible SeriesDatasheet
KAB-X,XM-DIN/8F/W-LITZE8-wire DIN 45326 cable, open ends, rectangleMüşteri talebine göre (m bazlı)POSIWIRE D8 (eski konnektör) · POSICHRON eski modellerDatasheet not uploaded yet — KAB-X,XM-DIN/8F/W-LITZE
KAB-X,XM-DIN/8F/G-LITZE8-wire DIN 45326 cable, open ends, straightMüşteri talebine göre (m bazlı)POSIWIRE D8 · POSICHRON eski modellerDatasheet not uploaded yet — KAB-X,XM-DIN/8F/G-LITZE
KAB-X,XM-CONIN/12F/G-LITZE-HSSI12-pin CONIN cable (for HSSI sensors)Müşteri talebine görePOSIWIRE HSSI çıkışlı modeller (özel sipariş)Datasheet not uploaded yet — KAB-X,XM-CONIN/12F/G-LITZE-HSSI
KAB-X,XM-CONIN/12F/G-LITZE-INC12-pin CONIN cable (for LD5VC, PP24VC)Müşteri talebine görePOSIWIRE incremental encoder çıkışlı modellerDatasheet not uploaded yet — KAB-X,XM-CONIN/12F/G-LITZE-INC
KAB-{2/5/10}M-M8/4F/W-LITZE4-wire M8 cable, open ends, rectangle2M / 5M / 10MPOSICHRON M8 konnektörlü modellerDatasheet not uploaded yet — KAB-{2/5/10}M-M8/4F/W-LITZE
KAB-{2/5/10}M-M8/4F/G-LITZE4-wire M8 cable, open ends, straight2M / 5M / 10MPOSICHRON M8 konnektörlü modellerDatasheet not uploaded yet — KAB-{2/5/10}M-M8/4F/G-LITZE
05

Connectors (At Cable End)

8 models · 4-20 mA output

8 MODELS
ModelDescriptionCompatible SeriesDatasheet
CONN-DIN-8F-W8-pin DIN 45326, rectangle (W)POSIWIRE D8 · POSICHRON eskiDatasheet not uploaded yet — CONN-DIN-8F-W
CONN-DIN-8F-G8-pin DIN 45326, straight (G)POSIWIRE D8 · POSICHRON eskiDatasheet not uploaded yet — CONN-DIN-8F-G
CONN-M12-8F-G8-pin M12, straight (G)POSIWIRE · POSITAPE · POSITILT · POSIROT 8-pin modellerDatasheet not uploaded yet — CONN-M12-8F-G
CONN-M8-4F-G4-pin M8, straight (G)POSICHRON M8 modellerDatasheet not uploaded yet — CONN-M8-4F-G
CONN-DIN-12F-W12-pin DIN, rectangle (for PP24V / LD5V)POSIWIRE PP24V / LD5V çıkışlı modellerDatasheet not uploaded yet — CONN-DIN-12F-W
CONN-CONIN-12F-G12-pin CONIN, straight (for HSSI / PP24VC / LD5VC / IE58LI/HI)POSIWIRE HSSI ve incremental modellerDatasheet not uploaded yet — CONN-CONIN-12F-G
WS-CONN-017S-M17-pin (for TSSI2 / TSSI-P)POSIWIRE TSSI çıkışlı modeller (özel)Datasheet not uploaded yet — WS-CONN-017S-M
CONN-TE-3F-G-LITZE-0,5M3-pin TE connector + 0.5m cable (for PRAS26)POSIROT PRAS26 (özel mating connector)Datasheet not uploaded yet — CONN-TE-3F-G-LITZE-0,5M
06

POSIWIRE Spare Parts (Potentiometer / Encoder / Signal Conditioner / Wire / Spring)

17 models · 4-20 mA output

17 MODELS
ModelCategoryDetailsDatasheet
1-Turn (0-125mm) · 5-Turn (250-625mm) · 10-Turn (750-40000mm) — POTI-CT-R2KPotansiyometre L10 (std)Standart ±0.10% f.s. doğrusallık. R1K veya R10K direnç değeri.Datasheet not uploaded yet — 1-Turn (0-125mm) · 5-Turn (250-625mm) · 10-Turn (750-40000mm) — POTI-CT-R2K
1-Turn · 5-Turn · 10-TurnPotansiyometre L05 (yüksek hassasiyet)±0.05% f.s. doğrusallık. Hassasiyet kritik uygulamalar için.Datasheet not uploaded yet — 1-Turn · 5-Turn · 10-Turn
100/200/300/400/500/1000 pulses/turnEncoder IEDüşük çözünürlük standart encoder. Talep üzerine sipariş.Datasheet not uploaded yet — 100/200/300/400/500/1000 pulses/turn
1500/2000/2500 pulses/turnEncoder IEOrta çözünürlük encoder.Datasheet not uploaded yet — 1500/2000/2500 pulses/turn
3000/3600 pulses/turnEncoder IEYüksek çözünürlük encoder.Datasheet not uploaded yet — 3000/3600 pulses/turn
IE24LI (A115115) / HI (A115280)Encoder IEÖzel IE varyantları.Datasheet not uploaded yet — IE24LI (A115115) / HI (A115280)
Tacho Escap/MaxxonTachoHız geri besleme için tacho jeneratör.Datasheet not uploaded yet — Tacho Escap/Maxxon
PP530 · PMUI · PMUV · ADSISignal ConditionerPremium signal conditioner (programlanabilir). Değişim sonrası sensör kalibre edilmeli.Datasheet not uploaded yet — PP530 · PMUI · PMUV · ADSI
420T · 420A · 10V · 1V / 5V / PM5VSignal ConditionerStandart 4-20mA / 0-10V / 0-5V signal conditioner. Değişim sonrası sensör kalibre edilmeli.Datasheet not uploaded yet — 420T · 420A · 10V · 1V / 5V / PM5V
Wire clip with stopper and crimp · Stopper · Crimp · Ball bearing · Sealing profile/mDraw Wire KomponentleriTel ucu mekanik komponentleri — kit dışında tek tek alınabilir.Datasheet not uploaded yet — Wire clip with stopper and crimp · Stopper · Crimp · Ball bearing · Sealing profile/m
Paslanmaz çelik /m · PA (poliamid) /mDraw Wire (metre bazlı)Yedek tel — paslanmaz endüstri standart, PA hafif uygulamalar için.Datasheet not uploaded yet — Paslanmaz çelik /m · PA (poliamid) /m
Up to 1250mm · Up to 3000mm · WS3 up to 8750mm · WS3.1 up to 15000mm · WS11/17/19 up to 15000mm · WS7 up to 40000mmDraw Wire Kits (komple)Tel + clip + stopper + crimp tam kit. Model ve ölçüm aralığına göre seçilir.Datasheet not uploaded yet — Up to 1250mm · Up to 3000mm · WS3 up to 8750mm · WS3.1 up to 15000mm · WS11/17/19 up to 15000mm · WS7 up to 40000mm
WS1.1, 1.2, 10, 12 (up to 1250mm) · WS2, 2.1, 11 (2000mm), 12 (from 1500mm) · WS3 · WS11 (5000-7500mm) · WS19/LR19 (up to 8000mm) · WS19/LR19 (15000mm) · WS3.1 · WS7.X (30000mm) · WS7.X (40000mm)Spring KitsTel geri çekme yayı — model ve ölçüm aralığına göre. Aşınma sonrası değişir.Datasheet not uploaded yet — WS1.1, 1.2, 10, 12 (up to 1250mm) · WS2, 2.1, 11 (2000mm), 12 (from 1500mm) · WS3 · WS11 (5000-7500mm) · WS19/LR19 (up to 8000mm) · WS19/LR19 (15000mm) · WS3.1 · WS7.X (30000mm) · WS7.X (40000mm)
WS3 spindle + nut · WS3.1 spindle + nut · WS7.X spindle + nut · Cable guide SD · Cable guide SD4 · Sealing WS7.2Guiding PartsTel kılavuz mekanizması. Model-spesifik.Datasheet not uploaded yet — WS3 spindle + nut · WS3.1 spindle + nut · WS7.X spindle + nut · Cable guide SD · Cable guide SD4 · Sealing WS7.2
T2.5/480-K 10 (WS7.5 için)Tooth BeltWS7.5'e özel diş kayışı.Datasheet not uploaded yet — T2.5/480-K 10 (WS7.5 için)
MK4 6-10 · MK4 6-12 (WS7.5-...-ME için)CouplingWS7.5-ME serisi için yarık kuplaj.Datasheet not uploaded yet — MK4 6-10 · MK4 6-12 (WS7.5-...-ME için)
Replacement brush for SAB5Dust WiperSAB5 toz silici için yedek fırça.Datasheet not uploaded yet — Replacement brush for SAB5
07

POSIWIRE Mechanical Accessories (Bracket / Cable Guide / Brush / LR19 Adapter)

16 models · 4-20 mA output

16 MODELS
ModelDescriptionApplicationDatasheet
WS31-BFW1, WS42-BFW1Mounting bracket WS31/42WS31 ve WS42 modelleri için özel montaj braketi.Datasheet (PDF) — WS31-BFW1, WS42-BFW1
SR1Cable guide pulley, 34mm diameterTel yönlendirme makarası — küçük çap, kısa-orta mesafe.Datasheet not uploaded yet — SR1
SR2Cable guide pulley, 80mm diameterBüyük çap makara — uzun mesafe + yüksek devir.Datasheet not uploaded yet — SR2
SR2-VACable guide pulley, 80mm V4A (stainless steel)Korozif ortamlar için paslanmaz çelik versiyon — gıda, kimya, denizcilik.Datasheet not uploaded yet — SR2-VA
SAB5Cable brush (dust wiper)Tel girişinde toz/kir silici fırça. WS10/12/17KT (up to 6250mm), WS19KT/KK (up to 8000mm) için.Datasheet not uploaded yet — SAB5
GK1 / GK2Attachment head (Metal / Plastic)Tel ucuna takılan ek başlık — hareketli parçaya bağlamak için. Metal (GK1) veya plastik (GK2).Datasheet not uploaded yet — GK1 / GK2
OE1Fastening eyeTel ucu sabitleme gözü — civataya veya halkaya geçirilir.Datasheet not uploaded yet — OE1
MAG1 / MAG2Magnetic clamp / Mounting magnetic clampManyetik tutucu — sensörü veya tel ucunu hızlı sabitlemek için (delme yok). POSIWIRE + POSITAPE ortak.Datasheet not uploaded yet — MAG1 / MAG2
SV1-x,xM (standart)Cable extension, 1mm stepsTel uzatma — 1mm hassasiyetle özel uzunluk. Standart sıcaklık.Datasheet not uploaded yet — SV1-x,xM (standart)
SV1-x,xM-HTCable extension, high temperature (without stopper rubber)Yüksek sıcaklık ortamı için tel uzatma — fırın çıkışı, ısıl işlem hatları.Datasheet not uploaded yet — SV1-x,xM-HT
SV1-x,xM-DYNCable extension, DYNEMADYNEMA (UHMW polietilen) tel — yüksek mukavemet, düşük ağırlık. Hafif uygulamalar.Datasheet not uploaded yet — SV1-x,xM-DYN
SCHWIMMER-200MMFloat (200mm — water surface tracking)Sıvı seviye ölçüm uygulaması için yüzgeç — POSIWIRE + POSITAPE ortak.Datasheet not uploaded yet — SCHWIMMER-200MM
WS-EXZENTERSynchro flange for LR19LR19 enkoder için senkronize flanş — ASM olmayan mil ile bağlantı.Datasheet not uploaded yet — WS-EXZENTER
WS-ADAPTER19Clamp flange for LR19LR19 enkoder için kelepçeli flanş — sıkma ile mile bağlantı.Datasheet not uploaded yet — WS-ADAPTER19
MK1-29-6-6Coupling for LR19 clamp flangeLR19 + clamp flange ikilisi için mil kuplajı.Datasheet not uploaded yet — MK1-29-6-6
MK1-24-6-10Coupling for LR19 synchro flangeLR19 + synchro flange ikilisi için mil kuplajı.Datasheet not uploaded yet — MK1-24-6-10
08

POSICHRON Position Magnets and Mounting Material

21 models · 4-20 mA output

21 MODELS
ModelCategoryDetails / Compatible ModelDatasheet
PCMAG5Unguided MagnetStandart serbest pozisyon mıknatısı.Datasheet not uploaded yet — PCMAG5
PCMAG5-6Unguided MagnetPCMAG5 6mm yükseklik versiyon.Datasheet not uploaded yet — PCMAG5-6
PCMAG5-20Unguided MagnetPCMAG5 20mm yükseklik versiyon.Datasheet not uploaded yet — PCMAG5-20
PCMAG5-25Unguided MagnetPCMAG5 25mm yükseklik versiyon.Datasheet not uploaded yet — PCMAG5-25
PCMAG7Unguided MagnetKüçük unguided magnet — kompakt uygulama.Datasheet not uploaded yet — PCMAG7
PCMAG3Guided MagnetPCQA22/23/24 için kılavuzlu pozisyon mıknatısı.Datasheet not uploaded yet — PCMAG3
PCRPMAG6Guided MagnetPCRP21 için kılavuzlu pozisyon mıknatısı.Datasheet not uploaded yet — PCRPMAG6
PCSTMAG1Ring MagnetAçık halka mıknatıs — PCST hidrolik için.Datasheet not uploaded yet — PCSTMAG1
PCSTMAG2Ring MagnetStandart kapalı halka mıknatıs — PCST için.Datasheet not uploaded yet — PCSTMAG2
PCSTMAG2-G1Ring Magnet — ÖzelÖzel versiyon ring magnet — özel boyut/uygulama.Datasheet not uploaded yet — PCSTMAG2-G1
PCSTMAG2-G2Ring Magnet — ÖzelÖzel versiyon ring magnet — özel boyut/uygulama.Datasheet not uploaded yet — PCSTMAG2-G2
PCSTMAG2-MH3Ring Magnet — Mobil HidrolikMobil hidrolik silindirler için ring magnet.Datasheet not uploaded yet — PCSTMAG2-MH3
PCSTMAG3Ring Magnet — FloatYüzgeç pozisyon — sıvı seviye ölçüm.Datasheet not uploaded yet — PCSTMAG3
PCSTMAG6Ring Magnet — FloatYüzgeç pozisyon — sıvı seviye ölçüm (alternatif).Datasheet not uploaded yet — PCSTMAG6
PCQA-BFS1 · PCFP23-BFS1 · PCFP24-BFS1/2MountingPCQA / PCFP23 / PCFP24 için mounting kit (isolator tubes + screws + isolation tape).Datasheet not uploaded yet — PCQA-BFS1 · PCFP23-BFS1 · PCFP24-BFS1/2
PCRP21-BFS3/4 · PCFP25-BFS1MountingPCRP21 / PCFP25 için mounting kit.Datasheet (PDF) — PCRP21-BFS3/4 · PCFP25-BFS1
PCFP25-RF-BFS1 · PCFP25-HF-BFS1MountingPCFP25 RF / HF varyantları için mounting kit.Datasheet (PDF) — PCFP25-RF-BFS1 · PCFP25-HF-BFS1
PCRP21-BFS2 · PCRP31-BFS4MountingPCRP21 / PCRP31 alternatif mounting.Datasheet (PDF) — PCRP21-BFS2 · PCRP31-BFS4
PCSTMAG2-BFS1MountingPCSTMAG2 ring magnet için mounting kit.Datasheet not uploaded yet — PCSTMAG2-BFS1
PCGS-xxxxPush RodSlider element için itme çubuğu — 75-2000mm uzunluk (3 boyut grubu). Link dahil.Datasheet not uploaded yet — PCGS-xxxx
PCGKPush Rod LinkPush rod uç linki — ayrı sipariş için.Datasheet not uploaded yet — PCGK
09

POSIROT Position Magnets + POSIROT/POSITILT Shared Mounting

16 models · 4-20 mA output

16 MODELS
ModelCategoryDetailsDatasheet
PRMAG1Pozisyon Mıknatısı (Standart)Standart pozisyon mıknatısı.Datasheet not uploaded yet — PRMAG1
PRMAG1-ZPozisyon Mıknatısı (Standart)PRMAG1 — Z (silindirik) versiyon.Datasheet not uploaded yet — PRMAG1-Z
PRMAG2Pozisyon Mıknatısı (Standart)Standart alternatif boy/şekil.Datasheet not uploaded yet — PRMAG2
PRMAG2-ZPozisyon Mıknatısı (Standart)PRMAG2 — Z (silindirik) versiyon.Datasheet not uploaded yet — PRMAG2-Z
PRMAG5-ZPozisyon Mıknatısı (Standart)PRMAG5 silindirik — özel uygulamalar.Datasheet not uploaded yet — PRMAG5-Z
PRMAG22Pozisyon Mıknatısı (Mini)Mini pozisyon mıknatısı.Datasheet not uploaded yet — PRMAG22
PRMAG20Pozisyon Mıknatısı (Mini)Mini pozisyon mıknatısı (alternatif boy).Datasheet not uploaded yet — PRMAG20
PRMAG21Pozisyon Mıknatısı (Mini)Mini pozisyon mıknatısı (alternatif boy).Datasheet not uploaded yet — PRMAG21
PRMAG22-T125Pozisyon Mıknatısı (Yüksek Sıcaklık)PRMAG22 — Tmax 125°C versiyon. Sıcak çevre uygulamaları.Datasheet not uploaded yet — PRMAG22-T125
PRMAG20-T125Pozisyon Mıknatısı (Yüksek Sıcaklık)PRMAG20 — Tmax 125°C versiyon.Datasheet not uploaded yet — PRMAG20-T125
PRMAG21-T125Pozisyon Mıknatısı (Yüksek Sıcaklık)PRMAG21 — Tmax 125°C versiyon.Datasheet not uploaded yet — PRMAG21-T125
PRPT-BPL1POSIROT/POSITILT MountingMounting plate — vidalı bağlantı (M5/M6 deliği). POSIROT + POSITILT ortak.Datasheet not uploaded yet — PRPT-BPL1
PRPT-BPL2POSIROT/POSITILT MountingMounting plate — kaynaklı bağlantı. POSIROT + POSITILT ortak.Datasheet not uploaded yet — PRPT-BPL2
PRPT-BPL3POSIROT MountingMounting plate — PRAS3 için özel.Datasheet not uploaded yet — PRPT-BPL3
PRPT-BFS1POSIROT/POSITILT MountingMounting excenter — açı ayarlı sabitleme. POSIROT + POSITILT ortak.Datasheet not uploaded yet — PRPT-BFS1
PRPT-BFS2POSIROT/POSITILT MountingMounting clamp — kelepçeli sabitleme. POSIROT + POSITILT ortak.Datasheet not uploaded yet — PRPT-BFS2
10

POSITAPE + POSIMAG Magnetic Scale Accessories

9 models · 4-20 mA output

9 MODELS
ModelSeriesDetailsDatasheet
WBR1POSITAPETape deflection pulley — bant yönlendirme makarası. Köşe geçişleri veya yön değişimi için.Datasheet not uploaded yet — WBR1
MAG1 / MAG2POSITAPEMagnetic clamp — POSIWIRE ile ortak. Hızlı sabitleme (delme yok).Datasheet not uploaded yet — MAG1 / MAG2
SCHWIMMER-200MMPOSITAPEFloat — POSIWIRE ile ortak. Sıvı seviye ölçüm yüzgeci.Datasheet not uploaded yet — SCHWIMMER-200MM
PMAB-10MM-x.xMPOSIMAGProtection tape (manyetik cetveli koruma maskeleme bandı) — per 0.5m. Cetvel manyetik alan korunur, mekanik darbeden korunur.Datasheet not uploaded yet — PMAB-10MM-x.xM
PMFP-10MM-x.xMPOSIMAGFlat profile — manyetik cetveli düz yüzeye yapıştırırken çerçeve. Per 0.5m.Datasheet not uploaded yet — PMFP-10MM-x.xM
PMHP-10MM-x.xMPOSIMAGHigh profile — manyetik cetveli yükseltilmiş çerçeve içinde. Per 0.5m.Datasheet not uploaded yet — PMHP-10MM-x.xM
PMFP-BFS1POSIMAGFlat profile mounting kit — her 600mm'de min 1 set.Datasheet not uploaded yet — PMFP-BFS1
PMHP-BFS1POSIMAGHigh profile mounting kit — her 600mm'de min 1 set.Datasheet not uploaded yet — PMHP-BFS1
PMGW3-10MMPOSIMAGGlider for PMIS3 — okuyucu kafa kayma kılavuzu.Datasheet not uploaded yet — PMGW3-10MM

FREQUENTLY ASKED QUESTIONS

About the ASM Accessories, Cables, and Spare Parts series

RELATED INSIGHTS · ASM ACCESSORIES, CABLES, AND SPARE PARTS
LIVE

RELATED INSIGHTS

Go deeper

04 ENTRIES
  • SOON

    ASM-AKSESUAR-KABLO-YEDEK-PARCALAR Series Selection Guide

    A practical approach to selecting the right model family by evaluating voltage, current, coil, mounting and environmental conditions together.
    In progress
  • SOON

    ASM-AKSESUAR-KABLO-YEDEK-PARCALAR Datasheet Checklist

    The key technical rows and application limits to verify before quotation or engineering approval.
    In progress
  • SOON

    ASM-AKSESUAR-KABLO-YEDEK-PARCALAR Application Notes

    Notes focused on thermal limits, switching duty, protection coordination and mounting conditions for field reliability.
    In progress
  • SOON

    ASM-AKSESUAR-KABLO-YEDEK-PARCALAR RFQ Preparation

    How to clarify part number, quantity, application and technical requirements to get accurate pricing and lead time.
    In progress

// end of index · 04 / 04